What is 5S METHODOLOGY and Its Objectives ?

5S Methodology Objective,

Identify, reduce and eliminate waste
Enhance teamwork
Enhance operation effectiveness in a better working environment
Form the basic advanced model for Productivity and Quality
Improvement.

As each 5S management techniques begins with an S, this approach has been named 5S.

Fig - 5S Methodology

SORT

To sort and systematically discard items that are not needed in the workplace.

SET IN ORDER

To arrange necessary items in a neat and systematic manner so that they can be easily retrieved for use and to return after use.

SHINE

To clean and inspect the workplace thoroughly so that there is no dirt on the floor, machines and equipment.

STANDARDISE

To maintain a high standard of workplace organisation by keeping everything clean and orderly at all times.

SUSTAIN

To train people to practise the 5S system continuously so that it becomes habitual

and ingrained in the culture of the organisation.

Comments

Fire Extinguishers: Types, Operation & Best Uses for Fire Classes

A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. Typically, a fire extinguisher consists of a hand held cylindrical pressure vessel containing an agent which can be discharged to extinguish a fire. There are two operation types of fire extinguishers: i. Stored pressure ii. Cartridge operated Stored Pressure In stored pressure units, the expellant is stored in the same chamber as the fire fighting agent itself. Depending on the agent used, different propellants are used. With dry chemical extinguishers, nitrogen is typically used; water and foam extinguishers typically use air. Cartridge Operated Cartridge-operated extinguishers contain the expellant gas in a separate cartridge that is punctured prior to discharge, exposing the propellant to the extinguishing agent. This type is not as common, used primarily in areas such as industrial ...

Important components of a Diesel Engine - Turbocharger

Important components of a Diesel Engine Turbocharger A turbocharger can significantly increase an engine’s horsepower without adding significant weight. It enhances engine performance by forcing more air into the combustion chamber, enabling better fuel combustion. A turbocharger is made up of two main sections: The turbine and the compressor. The turbine consists of the turbine wheel and the turbine housing. It is the job of the turbine housing to guide the exhaust gas into the turbine wheel. The energy from the exhaust gas turns the turbine wheel, and the gas then exits the turbine housing through an exhaust outlet area. The compressor also consists of two parts: the compressor wheel and the compressor housing. The compressor’s mode of action is opposite that of the turbine. The compressor wheel is attached to the turbine by a forged steel shaft, and as the turbine turns the compressor wheel, the high-velocity spinning draws in air and c...

Sewage Treatment Plant - Filter Feed Pumps Types and Operation And Maintenance Considerations

FILTER FEED PUMPS Filter Feed Pumps are used to draw water from the clarified water sump and pass it through the Pressure Sand Filter (PSF) and Activated Carbon Filter (ACF), which are installed in series to improve water quality. PRESSURE SAND FILTER (PSF) Working Principle: The upper layers of sand perform the actual filtration function, while gravel layers provide physical support. Specialized sand with a specific particle size is used to trap solid impurities present in water. The particles get entrapped in the spaces between sand grains, eventually blocking water flow. When the pressure drops beyond a set limit, the sand is cleaned by backwashing with water. Backwashing reverses the flow, fluidizing the sand bed and removing lighter solid particles as waste. Operation And Maintenance Considerations Filtration is followed by a short backwash sequence. The filter requires backwashing when the pressure drop across the filter reaches 0.5 kg/cm². Best practice: Backwash once per shift,...

FM Techie

Search This Blog